Waste Water Silo | Bidragon Steel Silos
A waste water silo from Bidragon is an environmental silo made of double-layer galvanized steel. The product documentation states, in the company's own terms, that it remains rust-free and spot-free after years of use, with good airtightness and no concern about leakage of the stored material, and that its application in the environmental field is a further area of development for the company.
Waste water storage places demands on sealing, corrosion resistance and safe containment, and those requirements are normally settled per project and per waste stream. The waste water silo page itself gives no capacity or diameter figure, so none is stated here, and figures from the galvanized water storage tank must not be applied to this product.
Key features
- Double-layer galvanized steel construction
- Good airtightness and leakage protection described (product documentation)
- Rust-free and spot-free performance described in the company's own terms
Specifications
| Item | Specification |
|---|---|
| Material | Double-layer galvanized steel |
| Diameter / capacity | Not stated on this product page — confirm in inquiry |
Values in this table come from the product documentation for this product only. Where a value is not listed, it is marked as to be confirmed in inquiry, and it must not be taken from another product on this site.
Applications
Waste water silos serve environmental and industrial sites handling waste water and similar liquids. The inquiry should state the liquid, its chemical character, the containment requirement and the discharge arrangement.
How this product fits in a storage line
Environmental silos and tanks are normally planned around the liquid or slurry, containment and sealing. Material compatibility, lining, ventilation and discharge all depend on what is stored, and the same tank format can require a different lining or fitting for a different medium. A buyer comparing environmental silos should therefore state the medium, its chemical character and the containment requirement in the inquiry, and should check which linings and fittings are included in the proposal.
What to confirm in your inquiry
Because silo requirements depend on the material, the site and the handling system, the following items are confirmed per project before any quotation is issued. Sending these details with your inquiry helps the supplier respond with a workable proposal rather than a generic price.
- Material to be stored, including bulk density, moisture content and flow behaviour, and whether the material is free-flowing or prone to bridging.
- Required storage capacity and any future expansion allowance, together with the available footprint and height limit at the site.
- Discharge method and downstream equipment, such as a screw conveyor, a pneumatic conveying line or a packing machine.
- Roof and bottom configuration, including whether a flat bottom, hopper bottom or elevated arrangement suits the discharge and foundation plan.
- Ventilation, level measurement, temperature monitoring and dust control requirements, where the stored material or local rules call for them.
- Surface protection and coating requirements, the installation method available at the site, and the delivery scope expected from the supplier.
- Any applicable design standard or local code that the project must follow, so that the proposal can be checked against it.
Where a value is not listed on this page, it is not a standard figure for this product. It is a project-specific figure to be confirmed in writing during the inquiry process, and it should not be assumed from another product on this site.
Related products
Request a quotation for this product. Specifications that are not listed on this page, including capacity, dimensions and delivery scope, are confirmed per project through the inquiry form. Send an inquiry →